EasyManua.ls Logo

Mitsubishi Electric VL-100EU5-E User Manual

Mitsubishi Electric VL-100EU5-E
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Mitsubishi Lossnay Ventilator
MODEL:
VL-100U
5
-E
(pull cord Type)
VL-100EU
5
-E
(wall switch Type)
Operating Instructions
1305875HF7601
Question and Answer IconNeed help?

Do you have a question about the Mitsubishi Electric VL-100EU5-E and is the answer not in the manual?

Mitsubishi Electric VL-100EU5-E Specifications

General IconGeneral
ModelVL-100EU5-E
Voltage220-240 V
Frequency50 Hz
Motor TypeAC Motor
Speed Settings2
Sound Level (Low)25 dB(A)
Operating Temperature Range-10 to +40 °C

Summary

Safety Precautions

General Warnings

Warnings about potential fatal or serious injuries due to misuse.

Cautions

Cautions regarding personal injury or damage to equipment from misuse.

Prohibited Actions

Prohibits actions that could cause hazards.

When the Unit is Used

Functions

Parts Names

Before Starting the Lossnay Unit

Switch on Circuit Breaker

Turn on the circuit breaker in the fuse box.

Insert Plug

Insert the plug into the wall socket.

Operation

Closing the Shutter

How to close the shutter in specific conditions.

Switching Modes (VL-100U5-E)

How to switch between operating modes (HI, LO, Off) for VL-100U5-E.

Using Control Switches (VL-100EU5-E)

How to use the control switches for VL-100EU5-E.

Maintenance

Power Off for Maintenance

Turn off power before performing maintenance.

Wear Gloves for Maintenance

Wear gloves during maintenance to prevent injury.

Ladder Safety

Ensure ladders are placed on a level surface for safety.

Removing and Cleaning Filters

Steps for removing and cleaning filters and the Lossnay core.

Opening the Panel

How to open the unit's panel.

Troubleshooting

Unit Does Not Start

Checks for power supply issues if the unit fails to start.

Noisy Unit

Checks for loose panels or clogged filters if the unit is noisy.

Cold Air or Frozen Shutter Issues

Addresses issues with cold air or frozen shutters.

Low Airflow

Troubleshooting low airflow due to clogged filters.

No Airflow

Checks for closed shutters if no air is coming from the unit.

Unit Noise from Installation

Checks for improper installation of components if the unit is noisy.

Panel Not Closing

Checks for wiring issues if the panel does not close properly.

Specifications

After-Sales Service

Related product manuals