12-12 Simple inspection and service
2 In the driver’s seat
First, check the range selector lever with the
engine stationary. Then, start the engine and per-
form the following checks and after while allowing
the engine to warm up.
Range selector lever
<Automatic transmission vehicle>
Set the starter switch in ON position but not start
the engine.
• Check if the range selector lever operates
smoothly and clicks at each range position
(“P” position through “2” position).
• Check if the shift indicator lamp in the meter clus-
ter indicates the selected range.
• Set the range selector lever to “P” position. Turn
the starter key to LOCK position and check if the
key can be removed from the key cylinder.
P. 12-59
Engine conditions
Check the engine for smooth starting and
quiet running.
Parking brake lever stroke
Check that the parking brake lever stroke is 7
to 9 notches when the lever is pulled with a
force of 295 N (66 lbs., 30 kgf).
P. 12-64
Z12716
Z12715
Z09197
Z10681
FE_FG.book Page 12 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
