2 - 9
MELSEC-A
2 SYSTEM CONFIGURATION
2.4.6 Precautions for using servo amplifier MR-J2S-B, MR-J2-03B5
There are the following precautions for use of the servo amplifier MR-J2S-B, MR-
J2-03B5.
•
The parameters, whose specifications and setting ranges have been changed
from those of the MR-J2-B by extension/addition/deletion, cannot be set from the
peripheral device.
For the items/ranges that can be set from the peripheral device, refer to section
"5.2.10 Servo parameters for MR-J2S-B" or "5.2.11 Servo parameters for
MR-J2-03B5".
Use a sequence program to set the items/ranges that cannot be set from the
peripheral device.
To Next Page
Loading...
