Need help?Do you have a question about the Mitsubishi Melsec-A AJ65SBT and is the answer not in the manual?
General| Model | AJ65SBT |
|---|---|
| Category | Control Unit |
| Manufacturer | Mitsubishi Electric |
| Series | Melsec-A |
| Communication Protocol | CC-Link |
| Power Supply | 24V DC |
| Number of occupied stations | 1 |
| Operating Temperature | 0 to 55 °C |
| Type | Programmable Logic Controller |
| Transmission rate | 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps, 10 Mbps |
| Current consumption | 100 mA |
| Humidity | 5% to 95% (non-condensing) |
| Vibration Resistance | 10 to 57 Hz |
| Shock Resistance | 150 m/s² |
Precautions for safe design and implementation of the system.
Precautions for safe and correct product installation.
Precautions for safe and correct wiring practices.
Precautions for safe startup and maintenance procedures.
Provides essential precautions for system configuration.
Lists the general technical specifications of the product.
Details the performance specifications of the AJ65SBT-CLB module.
Outlines network wiring specifications for CC-Link/LT systems.
Details remote I/O signals for the CC-Link master module.
Explains point mode and occupied stations settings.
Describes the assignment and data structure of remote registers.
Provides a flowchart for starting data link.
Covers mounting and installation procedures and precautions.
Lists precautions for handling the AJ65SBT-CLB module.
Explains connection methods using CC-Link/LT side cables.
Details wiring for CC-Link dedicated cables.
Explains how to check wiring for remote I/O stations and devices.
Provides a troubleshooting flowchart based on error phenomena.
Troubleshooting for CC-Link side issues.
Troubleshooting for CC-Link/LT side issues.
Troubleshoots input import issues from CC-Link/LT remote I/O.
Troubleshoots output provision issues from CC-Link/LT remote I/O.
Guides on using GX Developer for diagnostics.
To Next Page