1 - 17
MELSEC-A
1 PRODUCT OUTLINE
AD75
Setting method
: Indicates the sequence program that must be created.
<AD75 software package>
Set with AD75 software package
* Set the parameter and data for executing this function,
and the auxiliary functions that need to be set beforehand.
<GPP function software package>
Write
Create sequence program
for setting data
* When set with the "AD75 software package",
this does not need to be created.
PLC CPU Write
Write
Write
<GPP function software package>
Create sequence program for
executing main function
* Create sequence program for
outputting control signals, such
as start signal, to AD75.
Operation sequence program PLC CPU
<GPP function software package>
Create a sequence
program for the
auxiliary functions.
· Clock data setting
· Speed change
· Current value change
· Torque limit
· Restart, etc.
To Next Page
Loading...
