12 - 86
MELSEC-A
12 CONTROL AUXILIARY FUNCTIONS
NO
YES
I
II
End
Confirm the completion of the writing.
Turn OFF the PLC READY
signal [Y1D].
Carry out a writing request to
the flash ROM.
End teaching?
Confirm the completion of the writing.
Confirm that the buffer memory address [1106] has become 0.
Confirm that the buffer memory address [1138] has become 0.
Set 1 in the buffer memory address [1138].
• • • • • • • •
• • • • • • • •
• • • • • • • •
To Next Page
Loading...
