Mitsubishi A1SJH(S8) User Manual

2 - 22
SYSTEM CONFIGURATION2.
Product Name Model Name Description Applicable Model
Memory
cassette
EP-ROM A1SNMCA-8KP 8k steps, equipped with EP-ROM(directly) For A1SJH/A1SHCPU: A6WA-28P required
E
2
PROM
A1SNMCA-2KE
2k steps, equipped with E
2
PROM (directly)
Write/read directly from the peripheral device for A1SJH/
A1SHCPU is possible.
A1SNMCA-8KE
8k steps, equipped with E
2
PROM (directly)
A2SNMCA-
30KE
With 30k-step E
2
PROM (directly)
Direct writing to and reading from a peripheral device is
feasible.
Memory write
adapter
A6WA-28P
Used for memory cassette connector/EP-ROM 28-
pin adapter
Used for ROM writing in A1SNMCA-8KP
Battery A6BAT IC-RAM memory backup
Installed in the A1SJHCPU(S8), A1SHCPU,
A2SHCPU(S1) main unit
Connector/terminal
block converter unit
A6TBXY36
For the sink-type input module and sink-type output
module. (standard type)
A1SX41(S1/S2), A1SX42(S1/S2), A1SY41, A1SY41P,
A1SY42, A1SY82, A1SH42(S1), A1SH42P(S1)
A6TBXY54
For the sink-type input module and sink-type output
module. (2-wire type)
A6TBX70 For the sink-type input module (3-wire type)
A1SX41(S1/S2),A1SX42(S1/S2),A1SH42(S1),
A1SH42P(S1)
A6TBX36-E For the source-type input module (standard type) A1SX71, A1SX82-S1, A1SX81(S2)
A6TBY36-E For the source-type output module (standard type) A1SY81, A1SY82
A6TBX54-E For the source-type input module (2-wire type) A1SX71, A1SX82-S1, A1SX81(S2)
A6TBY54-E For the source-type output module (2-wire type) A1SY81, A1SY82
A6TBX70-E For the source-type input module (3-wire type) A1SX71, A1SX82-S1, A1SX81(S2)
Cable for
connector/terminal
block converter unit
AC05TB 0.5m (1.64ft.) for the sink module
A6TBXY36
A6TBXY54
A6TBX70
AC10TB 1m (3.28ft.) for the sink module
AC20TB 2m (6.56ft.) for the sink module
AC30TB 3m (9.84ft.) for the sink module
AC50TB 5m (16.40ft.) for the sink module
AC80TB 8m (26.24ft.) for the sink module
AC100TB 10m (32.81ft.) for the sink module
AC05TB-E 0.5m (1.64ft.) for the source module
A6TBX36-E
A6TBY36-E
A6TBX54-E
A6TBY54-E
A6TBX70-E
AC10TB-E 1m (3.28ft.) for the source module
AC20TB-E 2m (6.56ft.) for the source module
AC30TB-E 3m (9.84ft.) for the source module
AC50TB-E 5m (16.40ft.) for the source module
Relay terminal unit A6TE2-16SRN For the sink-type output module A1SY41, A1SY41P, A1SY42, A1SH42(S1), A1SH42P(S1)

Mitsubishi A1SJH(S8) Specifications

General

Brand	Mitsubishi
Model	A1SJH(S8)
Category	Controller
Language	English