Mitsubishi City Multi PURY-P400 - LEV Replacement Procedure; Solenoid Valve Coil Replacement

–102–
(5) LEV
Be careful on removing heavy parts.
Procedure Photos
1. Remove the service panel. See (1)-1.2.3
2. Replace the applicable LEV.
Important!
1 When performing the above procedure, be sure to
allow for enough service space in the ceiling area
for welding.
2 If necessary, the unit can be lowered from the ceil-
ing before starting work.
(6) Solenoid Valve Coil
Procedure Photos
1. Remove the service panel. See (1)-1.2.3
2. Disconnect the connector of the applicable
solenoid valve.
3. Remove the solenoid valve coil.
1 SVA, SVB, and SVM1, 2 solenoid valve coils
can be serviced from the maintenance port.
If service space is available. SVC can be
serviced from the back.
Solenoid valve
LEV3
LEV1