Mitsubishi CP710E - Selecting Input Signal

18
6. Printing procedures (Basic prints)
Selecting input signal
• Select " VIDEO " or " S-VIDEO " according to the input signal.
• The input signal can be set on the menu screen displayed on the monitor.
• It is not necessary to select the input signal every time you print unless the input signal is changed.
1 Press the MENU button
MENU
.
• " MAIN MENU " is displayed.
2 Press the DOWN
or UP shift button to select " 2. SIGNAL SET [ ] ".
3 Press the RIGHT
shift button.
• " 2. SIGNAL SET " menu screen is displayed.
• Normally, "INPUT " is selected when opening the "2. SIGNAL SET [ ] "
on step 2. When other item is selected, press the UP or DOWN
shift button to select "INPUT ".
4 Press the RIGHT
or LEFT shift button to select "VIDEO" or "S-VIDEO" .