Mitsubishi CP710E - Page 44

43
7. Setting the functions (Memory SW menu)
SETTING FUNCTIONS
22
22
2 MEMORY SW MENU
When pressing the POWER button while pressing the MEMORY button on the front panel with the POWER
turned off the MEMORY SW MENU is displayed.
(e.g.) MEMORY SW MENU 1. KEY SET KEY LOCK
Item and setting are as shown below.
1. KEY SET................... The function of button is invalid, setting the function of memory button
2. REMOTE SET........... Setting the BUSY signal level and definition of the external terminal (1, 2)
3. PRINT SET ............... Print direction, printing speed, cutting position, vertical position, "extra" size print
4. SYSTEM SET ........... Initializing user setting, inform the number of remaining paper
SAVE.............................. Storing the above setting in memory.
SAVE
This menu is shown in the lowest position on the "MEMORY SW MENU".
Selecting "OK" or "CANCEL" on the setting value of the menu 1-4.
Close the menu 1- 4 and normal display is shown.
1 Press the SET
SET
button.
• " SAVE " is indicated in red.
2 Press the SET
SET
button.
• The selected command is executed.