- 4 -
Connect the colour monitor and computer with
the necessary cords and cables.
1.9 Quick Operation Chart
To summarize the steps in connecting your computer
with the colour monitor and setting the necessary
controls and switches, refer to the chart below.
See
Section 3. INSTALLATION AND CONNECTION
Turn on the computer.
Turn on the colour monitor.
Set the controls.
See
Section 4. OSD(On Screen
Display) FUNCTIONS
If a problem appears.
If the problem persists.
Call for your authorized Product Support.
See Section 5. TROUBLESHOOTING
OK
OK
1.7 Unpacking
After you unpack the box you should have all of the items
indicated in Figure 1. Save the box and packing materials
in case you transport the monitor.
Figure 1
Figure 2
1. Colour Monitor
2. AC Power Cord
3. User's Guide
(this document)
1.8 Tilt/Swivel Base
The monitor comes with a tilt/swivel base. This enables you
to position the monitor at the best angle and tilt for
maximum viewing comfort.
Screen Position Adjustment
Adjust the tilt and rotation of the monitor by placing your
hands at opposite sides of the case. You can adjust the
monitor 90 degrees right or left, 10 degrees up or 5 degrees
down, as shown below.
1
2
3
Keep your fingers away from the pivot area of the tilt/swivel
base.
CAUTION
90°
5°
10°
90
To Next Page
Loading...
Need help?
General
