5-5
1.4 Regulation Information & Marking Location
Marking
Location
Regulation Information
(1) UL UL1950 3rd Edition (or UL60950 3
rd
edition)
(1) C-UL CAN/CSA-C22.2 NO.950:1995 (or CAN/CSA-C22.2 No.60950:2000)
(1),(2) TUV-GS EN60950 : 1992 & AD1/AD2/AD3/AD4/AD11(or EN60950:2000),
EK1-ITB 2000, ISO9241-3: 1992, ISO9241-7: 1998, ISO9241-8: 1997
(1) PSB Singapore Safety
(1) CCIB Chinese Safety & EMI
(1),(2) FCC 47 CFR Chapter I Part15 Subpart B, Class B
- DOC Interference-Causing Equipment Standard ICES-003 Issue 3,Class B
- DHHS 21CFR Chapter I Subchapter J
- Red Act Radiation Emitting Devices Act
- PTB German X-ray
- MPR-III prEN50297
- TCO’95 Requirements for environmental labeling of personal computers
(1),(2),(3) TCO’99 Requirements and test methods for environmental labeling of
display(CRT) and Ecology
(1),(2),(3) CE-Marking EN60950: 1992 & AD1/AD2/AD3/AD4/AD11(or EN60950 : 2000)
EN55022: 1998 Class B,
EN55024: 1998(IEC61000-4-2,-4-3,-4-4,-4-5,-4-6,-4-8,-4-11)
EN61000-3-2 : 1995 & AD1/AD2, EN61000-3-3 : 1995
(1),(2),(3) Energy Star International Energy Star office Equipment Program
(2) PCBC Poland Safety
(1),(2),(3) Gost Russian Safety
(1),(2),(3) C-tick AS/NZS3548:1995+A1/A2:1997
(1),(2) JPHG
(Japan Power Harmonics Guidelines)
Guidelines for the suppression of Harmonics in Household and General –
Use Equipment
- JEIDA
JEIDA-G-15-1996: Guide Line for Low Frequency electromagnetic field
JEIDA-G11-1996: Guide Line for Electrostatic Field Emission.
- WHQL
Microsoft Windows® Hardware Quality Labs
Note:
(1) The mark is printed on the “ Rating Label ”.
(2) The mark is printed on the “ Carton Box ”.
(3) The mark is printed on the “ User’s Manual ”.