Need help?Do you have a question about the Mitsubishi DX-TL304E and is the answer not in the manual?
Explains the structure and methods for using the manual.
Describes methods to find desired information within the manual.
Details the initial connection steps for cameras, monitors, and sensors.
Steps for configuring initial settings using the Setup Wizard.
Explains how to configure additional settings for desired operation.
Information on user-friendly operation and USB mouse connectivity.
Explains the functionality for searching recorded data based on motion.
Information on connecting various devices and cables.
Detailed guide on various recording methods and settings.
Instructions and options for playing back recorded data.
Methods for searching recorded images based on various criteria.
Covers various settings and miscellaneous topics.
Configuration for warning signals and external terminal behavior.
Procedures for setting up simple and password locks.
Recommendations for optimal installation site selection.
Important information and precautions regarding the HDD.
Detailed guidelines for unit installation and handling procedures.
Instructions for cleaning and general upkeep of the unit.
Important considerations when building a surveillance system.
Precautions and recommendations for network setup and security.
General statement on Mitsubishi's limited liability for system errors and data loss.
Information regarding the licensing of included open-source software.
Identification and explanation of the recorder's front panel controls and indicators.
Continuation of the explanation of front panel components.
Description of controls located inside the recorder's front door.
Explanation of the various operation buttons on the recorder's front panel.
Identification and explanation of the recorder's rear panel connectors.
Further details on the recorder's rear panel connectors.
Explanation of the information displayed on the recorder's screen.
Details on screen elements like recorder title and operation status.
Diagram and instructions for connecting cameras, monitors, and sensors.
How to connect alarm signals and sensors to the recorder.
Procedure for securing cables using clamp bands.
Precautions when connecting multiple external HDDs.
Methods for accessing and displaying different menu types.
How to navigate and operate menus using front panel buttons or mouse.
Steps to close various menu screens.
Explains how to control the recorder using the mouse operation screen.
Detailed functions available through the mouse operation screen.
Step-by-step guide to automatic initial setup using the wizard.
How to assign HDDs to Main, Copy, and Archive device roles.
Warnings and considerations when using external storage devices.
Procedures for connecting and setting up HDDs.
Step-by-step guide to registering the internal HDDs.
Explains how to set up HDD mirroring for data redundancy.
Steps for registering external HDDs connected via the serial bus.
How to view and confirm the status of registered storage devices.
Configuring repeat recording and HDD partitioning.
How to divide the Main device's storage into partition areas.
Features for displaying multiple camera feeds simultaneously.
How to display a live image from a single camera.
Methods for dividing the screen to show multiple camera feeds.
How to automatically switch between camera feeds at set intervals.
How to switch between different video output signals.
Using the zoom function to magnify displayed images.
Viewing playback of one camera while live images are displayed.
How to control PTZ cameras connected to the recorder.
Overview of manual, timer, and external signal recording.
Explains normal, alarm, and pre-alarm recording types.
Important checks and considerations before configuring recording.
How to play back recorded data while recording is in progress.
Steps for configuring recording settings via auto or manual modes.
Setting the picture size for different recording patterns.
Configuring picture quality and frame rate per second for cameras.
Setting up alarm cameras, input triggers, and PTZ positions.
Configuration settings for emergency recording.
Settings for enabling and configuring audio recording.
Configuring sensitivity, threshold, and detection areas for motion detection.
Setting up scheduled recording programs for different days and times.
Guide to automatically configuring recording settings using wizard.
Steps for manually configuring recording parameters.
Selecting and configuring specific recording patterns.
Setting the resolution for recorded images.
Configuring recording to start upon motion detection.
Setting the duration for recording before an alarm event.
Configuring the duration for recording after an alarm event.
Setting image quality and frame rate for normal and alarm recording.
Selecting cameras to be used for alarm recording.
Configuring triggers for alarm recording and PTZ preset positions.
Additional information and cautions related to recording settings.
Details on how preliminary recording functions and its data management.
Information on how HDDs are utilized for recording pre-alarm data.
Configuration steps for emergency recording.
Additional details and indications related to emergency recording.
Detailed configuration for motion detection sensitivity, threshold, and area.
Important warnings and considerations for motion detection configuration.
How to configure audio recording settings, quality, and mode.
How to manually stop alarm input temporarily.
Steps for performing manual recording operations.
How to set up and configure timer recording schedules.
Further configuration for timer recording, including special days and holidays.
Troubleshooting tips for timer recording errors and issues.
How the recorder handles overlapping timer recording schedules.
How to choose the storage device for playback.
Basic procedure for playing back recorded images and audio.
Details on pausing, stopping, and navigating playback.
Searching for the oldest recorded image.
Searching for the latest recorded image.
Searching images based on specific date and time.
Searching images based on recorded alarm events.
Searching images based on motion detection events.
Steps to perform a search for the oldest recorded data.
Steps to perform a search for the latest recorded data.
How to set search parameters like device, camera, and time.
Steps to search for images using the alarm list.
Steps to search for images by specifying date and time.
Detailed steps for searching recorded images via the alarm list.
Detailed steps for searching images by date and time.
How to copy alarm-registered images to external media.
Steps to search for recorded images containing motion.
Adjusting playback speed during forward or reverse playback.
Performing playback one frame at a time.
Playing back recorded footage in reverse.
Adjusting playback speed beyond the original recording rate.
How to jump to and play the latest recorded image.
Warnings about potential issues during playback operations.
How to mark and save specific images for later retrieval.
How to locate and view bookmarked images.
Copying still or moving images with a single button press.
Copying data based on start/end times and data size.
How to create backup copies of recorded data.
Steps to copy data by defining start time and data capacity.
Steps to copy data by defining end time and data capacity.
How to copy data by specifying both start and end times.
Important warnings and considerations for data copying operations.
Detailed steps for archiving recorded data to external media.
Instructions for copying data to videotape using an analog VCR.
Overview of available communication functions like Web browser and e-mail.
Information on simultaneous user access and limitations.
How to manage network bandwidth for optimal communication.
Important warnings when using remote access via Web browser or PC software.
How to access and control the recorder using a web browser.
Minimum system specifications for PC access.
How to physically connect a PC to the recorder for communication.
Steps for logging into the recorder via Microsoft Internet Explorer.
Overview of operations available from the main menu.
How to load and display live camera feeds on a PC.
How to load and play back recorded video from the recorder.
Methods for searching recorded images using various functions.
Steps to search for images by specifying the date and time.
Steps to search for images related to alarm events.
How to modify user authorities and manage user accounts.
Modifying access permissions for existing registered users.
Procedure for deleting registered user accounts.
Steps to add new user accounts with specific authorities.
How to set custom titles for the recorder and connected cameras.
Configuring email server, sender, and recipient settings for notifications.
Configuration details for the SMTP server.
Configuration details for the POP server.
Settings for Domain Name System (DNS) server addresses.
Additional configuration options, including recorder ID and attachment delay.
Further E-mail setup options, including image attachment and test mail.
Configuration for uploading images to an FTP server upon events.
Configuring FTP server address, user ID, password, and transmission settings.
Defining triggers and cameras for FTP notification.
How to change SSL settings and connection mode for secure access.
How to set or synchronize the recorder's clock via PC.
Configuring automatic clock adjustment using an SNTP server.
Steps for manually setting the recorder's date and time.
Configuring automatic or manual adjustment for daylight saving time.
How to synchronize the recorder's clock with the connected PC's clock.
Procedure for safely logging out of the system.
Information on setting up email notifications for events and errors.
How to configure FTP notification for uploading data upon events.
Using dedicated software for remote viewing and control.
Accessing and overview of the main setup menu.
Steps to access the Setup menu.
A chart providing an overview of setup items and their page references.
Setting the current time, date, and menu display language.
Configuring warning displays and external terminal behavior.
Setting operations for low remaining capacity warnings.
Setting operations for error conditions.
Configuring output signals based on recorder status and remaining capacity.
Setting functions triggered by external event terminals.
Options for customizing on-screen display elements like clock and recorder title.
Setting the display mode and position for the clock.
Configuring the display of recorder status and custom title.
Setting camera numbers and titles for monitoring.
Making menu screens transparent to view camera feeds.
Settings for displaying camera feeds on Output A.
Settings for displaying camera feeds on Output B.
Copying configuration settings from Output A to Output B.
Configuring split-screen layouts for displaying multiple cameras.
Setting how alarms are displayed on screen.
Hiding camera feeds with blue/black screens during recording or playback.
Configuring video output format and quality for XGA monitors.
Managing recorder menu settings by loading, saving, or resetting.
Settings for communication settings.
Configuring serial communication settings for PC control.
Configuring network settings like IP address, subnet mask, and gateway.
Setting service ports for Web and network software communication.
Setting email addresses for alarm notifications.
Setting IP addresses for alarm notifications.
Displaying details of FTP notification settings.
Configuring settings for controlling connected PTZ cameras.
Adjusting the recorder's internal clock and time zone.
Selecting the display language for the user interface.
Configuring warning displays and external terminal behavior.
Setting operations for low remaining capacity warnings.
Enabling or disabling audible beeps for button operations.
Enabling or disabling the buzzer for alarm recording.
Enabling or disabling buzzer sounds for communication events.
Setting recorder operations when an error is detected.
Configuring output signals from MODE OUT terminals based on recorder status.
Setting warnings and operations for low remaining storage capacity.
Assigning functions to external event terminals.
Viewing registered program files for event terminals.
Reading program data from external media.
Deleting program files associated with event terminals.
Customizing on-screen display elements.
Setting the display mode and position for the clock.
Configuring the display of recorder status and custom title.
Setting and displaying the recorder's title.
Setting camera numbers and titles for monitoring.
Making menu screens transparent to view camera feeds.
Configuring the sequential display of camera feeds.
Setting how alarms are displayed on screen.
Configuring split-screen layouts and sequential display for outputs.
Copying configuration settings from Output A to Output B.
Configuring split-screen layouts for displaying multiple cameras.
Hiding camera feeds with blue/black screens during recording or playback.
Configuring video output format and quality for XGA monitors.
Configuration options for playback functions.
Enabling or disabling continuous repeat playback of recorded data.
Displaying images field by field to reduce shaking.
Detecting altered or externally recorded images.
Setting a limit on how far back recorded data can be played.
Managing recorder menu settings by loading, saving, or resetting.
How to load menu settings from external media or internal memory.
How to save current recorder menu settings.
Resetting all menu settings to factory defaults.
Configuration for communication settings.
Configuring serial communication settings for PC control.
Configuring network settings like IP address, subnet mask, and gateway.
Setting service ports for Web and network software communication.
Setting email addresses for alarm notifications.
Setting IP addresses for alarm notifications.
Displaying details of FTP notification settings.
Configuring settings for controlling connected PTZ cameras.
Viewing details of email notification settings.
Viewing details of IP alarm notification settings.
Checking and configuring FTP notification settings.
Configuring protocol, port, ID, and reverse direction for PTZ cameras.
Enabling/disabling a simple lock without password entry.
Using passwords to restrict recorder operations with different levels.
Setting passwords for three levels of operational restriction.
Using passwords to prevent deletion of recorded data from the Main device.
Steps to set a 4-digit password for lock levels.
Activating the password lock function.
Steps to disable the password lock.
How to disable password locks for specific levels.
Steps to enable password protection for HDD data.
Procedures for changing passwords for restricting operations and HDD protection.
Steps to switch from password lock to simple lock mode.
How to change the level of restricted operations for password locks.
How to lock specific data segments to prevent deletion.
How to view a list and search for protected data segments.
Steps to remove protection from recorded data.
Instructions for deleting recorded data from storage devices.
How to enable HDD sleep mode to reduce power consumption and load.
Viewing information about registered devices and their data areas.
Viewing detailed information for the Main storage device.
Viewing detailed information for the Copy storage device.
Viewing detailed information for the Archive storage device.
How to view the recorder's system log for events and errors.
Information on the circuit that retains settings during power loss.
How the recorder resumes operation after a power failure.
System log registration for MAIN switch power off events.
Information about the reset button function.
A practical example demonstrating setup and recording configurations.
A practical example illustrating manual recording settings.
A practical example showing alarm and pre-alarm recording setup.
How to use the self-check function to diagnose recorder issues.
Troubleshooting steps related to installation and power issues.
Troubleshooting steps for recording-related problems.
Troubleshooting steps for playback issues.
Troubleshooting steps for copy and archive operations.
Troubleshooting steps for network and communication problems.
Troubleshooting steps for search function issues.
Troubleshooting for other issues like motion detection and display problems.
Explains how warnings and call-out signals are displayed and managed.
Details on specific information codes, causes, and remedies.
Details on specific warning codes, causes, and remedies.
Further details on information codes, causes, and remedies for errors.
Further details on warning codes, causes, and remedies for errors.
Additional warning codes, causes, and remedies.
Definition of MPEG4 video compression standard.
Definition of data copying and archiving procedures.
Definition of HDD mirroring for data redundancy.
Definition of overwriting old data when storage is full.
Definition of dividing HDD storage into sections.
Definition of displaying multiple camera feeds as one output.
Definition of the primary HDD used for normal recording.
Definition of the protocol for transferring files over a network.
Definition of the protocol for synchronizing network clocks.
Definition of frames per second as an indicator of video smoothness.
Definition of the basic structure of an MPEG video image.
Definition of the serial bus interface for connecting devices.
Definition of recording triggered by external emergency signals.
Definition of searching images using pre-registered bookmarks.
Definition of pan, tilt, and zoom camera control.
Definition of recording based on programmed schedules.
Definition of searching images based on detected motion.
Definition of DVD media for recording and playback.
Definition of recording starting before an alarm or emergency event.
Definition of terminals for outputting failure/abnormality signals.
Definition of terminals for outputting recorder operation status.
Definition of viewing live and playback video simultaneously.
Technical specifications of the recorder, including power, dimensions, and connectors.
Portuguese: Recommendations for optimal installation site selection.
Portuguese: Lists locations that should be avoided for installation.
Portuguese: Important information and precautions regarding the HDD.
Czech: Detailed guidelines for unit installation and handling procedures.
Portuguese: Instructions for cleaning and general upkeep of the unit.
Portuguese: Precautions for mounting the unit in a rack.
Portuguese: Steps and precautions for moving the unit.
Polish: Important considerations when building a surveillance system.
Polish: Advice on performing and backing up crucial recordings.
Polish: Explains the functionality for searching recorded data based on motion.
Swedish: Information on estimated recording duration and product warranty.
Swedish: Notes regarding the proper use of the power cord.
Swedish: Precautions and recommendations for network setup and security.
Swedish: Legal notice regarding copyright protection for recorded images.
Swedish: General statement on Mitsubishi's limited liability for system errors and data loss.
Czech: Detailed guidelines for unit installation and handling procedures.
Czech: Warning about potential radio interference.
Czech: Important information and precautions regarding the HDD.
Polish: Detailed guidelines for unit installation and handling procedures.
Polish: Instructions for cleaning and general upkeep of the unit.
Polish: Precautions for mounting the unit in a rack.
Polish: Steps and precautions for moving the unit.
Polish: Important considerations when building a surveillance system.
Polish: Advice on performing and backing up crucial recordings.
Polish: Explains the functionality for searching recorded data based on motion.
Swedish: Information on estimated recording duration and product warranty.
Swedish: Notes regarding the proper use of the power cord.
Swedish: Precautions and recommendations for network setup and security.
Swedish: Legal notice regarding copyright protection for recorded images.
Swedish: General statement on Mitsubishi's limited liability for system errors and data loss.
Czech: Detailed guidelines for unit installation and handling procedures.
Czech: Warning about potential radio interference.
Czech: Important information and precautions regarding the HDD.
Czech: Detailed guidelines for unit installation and handling procedures.
Czech: Instructions for cleaning and general upkeep of the unit.
Czech: Precautions for mounting the unit in a rack.
Czech: Steps and precautions for moving the unit.
Czech: Important considerations when building a surveillance system.
Czech: Advice on performing and backing up crucial recordings.
Czech: Explains the functionality for searching recorded data based on motion.
Swedish: Information on estimated recording duration and product warranty.
Swedish: Notes regarding the proper use of the power cord.
Swedish: Precautions and recommendations for network setup and security.
Swedish: Legal notice regarding copyright protection for recorded images.
Czech: General statement on Mitsubishi's limited liability for system errors and data loss.
Polish: Advice on what to do when the unit is not in use.
Polish: Recommendations for optimal installation site selection.
Polish: Lists locations that should be avoided for installation.
Polish: Warning about potential radio interference.
Polish: Important information and precautions regarding the HDD.
Polish: Detailed guidelines for unit installation and handling procedures.
Polish: Instructions for cleaning and general upkeep of the unit.
Polish: Precautions for mounting the unit in a rack.
Polish: Steps and precautions for moving the unit.
Polish: Important considerations when building a surveillance system.
Polish: Advice on performing and backing up crucial recordings.
Polish: Explains the functionality for searching recorded data based on motion.
Polish: Legal notice regarding copyright protection for recorded images.
Czech: General statement on Mitsubishi's limited liability for system errors and data loss.
Czech: General statement on Mitsubishi's limited liability for system errors and data loss.
Contact information for Mitsubishi Electric Europe B.V. UK Branch Office.
Contact information for Mitsubishi Electric Europe B.V. German Branch Office.
Contact information for Mitsubishi Electric Europe B.V. Spanish Branch Office.
Contact information for Mitsubishi Electric Europe B.V. French Branch Office.
Contact information for Mitsubishi Electric Europe B.V. Italian Branch Office.
Contact information for Mitsubishi Electric Benelux.
Contact information for Mitsubishi Electric Scandinavia.
Contact information for Mitsubishi Electric Ireland.
General| Brand | Mitsubishi |
|---|---|
| Model | DX-TL304E |
| Category | Voice Recorder |
| Language | English |
To Next Page