OTE
● Every time the “DISP” button is pressed lightly, the moni-
tor will return to the previous display.
● When the “BACK” function button is shown, pressing it
causes the monitor to return to the previous display.
1. Press the “DISP” button for at least 2 seconds to change
the display.
2. Press the “ ” function button, align the cursor with the
desired setting, and press the “SELECT” function button.
• “1.Display brightness adjustment” → P.3 -112
• “2.Turn off Display” → P.3-114
• “3.Record Maintenance” → P.3-115
• “4.Next menu (Operable only with vehicle stationary)”
→ Proceed to step 3 of this procedure.
CAUTION
!
● It is dangerous to operate the display while driving
the vehicle. Operate the display only when the vehi-
cle is safely parked.
BK0121600US.book 109 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
