Features and controls
3-111
3
5. Press the “ ” function button, align the cursor with the
desired setting, and press the “SELECT” function button.
• “Zone code setting” → P.3-131
• “Compass calibration” → P.3-133
6. Press the “ ” function button, align the cursor with the
desired setting, and press the “SELECT” function button.
• “Display settings” → P.3-118
• “Units” → P.3-120
• “Door open warning” → P.3-123
• “Other settings” → P.3-124
BK0121600US.book 111 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
