3-122
Features and controls
3
1. Press the “ ” function button, align the cursor with the
unit you wish to select, and press the “SELECT” function
button.
•mile
•km
2. The monitor will show “The setting is progressing” while
the setting change is in progress.
When the setting change has been completed successfully,
a tone will sound once and the monitor will return to the
“Distance unit” display. If the setting change is not suc-
cessful, the monitor will show “The setting failed.” then
return to the “Distance unit” display.
Barometer unit
N00504000032
The unit for the atmospheric pressure can be set to in.Hg, hPa,
kPa, or mb.
OTE
● When the unit for the atmospheric pressure is changed,
the unit in the elevation display changes accordingly.
1. Press the “ ” function button, align the cursor with the
unit you wish to select, and press the “SELECT” function
button.
•in.Hg
•hPa
•kPa
•mb
BK0121600US.book 122 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
