Features and controls
3-151
3
2. If communication is successful, the monitor will show the
number of registered remote control transmitters then
return to the display in step 1 of this procedure.
If communication is not successful, the monitor will show
the number of registered remote control transmitters as
“—” then return to the display in step 1 of this procedure.
Defaults
N00535100055
The default function returns all customized settings to their ini-
tial conditions.
1. Display “Defaults” on the monitor in accordance with
“Basic operation” (see page 3-109), align the cursor with
it, and press the “SELECT” function button.
BK0121600US.book 151 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
