OTE
● In a vehicle with a multi center display, the multi center
display can be used to enable and disable speed-sensitive
operation of the wipers. For details, refer to “Setting and
customization” on page 3-108.
To adjust intermittent intervals
With the lever in the “INT” (speed-sensitive) position, the
intermittent intervals can be adjusted by turning the knob (A).
Misting function
Move the lever in the direction of the arrow and release, and
the wipers will operate once.
Use this function when you are driving in mist or drizzle.
If the lever is held in the upward position (MIST), the wipers
continue operating until the lever is released.
1- Fast
2- Slow
BK0121600US.book 160 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
