For emergencies
6-19
6
7. On aluminum wheels, temporarily tighten the wheel nuts
(flange nuts) until their flange section comes in contact
with the wheel and it is no longer loose.
On steel wheel (spare wheel), install the wheel nuts with
their tapered ends facing inward, then tighten by hand
until the wheel is no longer loose.
OTE
● Flange nuts can be temporarily used on the steel wheel
(spare wheel), but return them to the original wheel and
tire as soon as possible.
● If all four wheels are changed to steel wheels, use tapered
nuts.
Aluminum wheels
CAUTION
!
● Never apply oil to either the wheel bolts or the nuts
or they will tighten too much.
Steel wheel (spare wheel)
BK0121600US.book 19 ページ ２０１０年４月１２日 月曜日 午前１０時３９分
To Next Page
Loading...
