Mitsubishi F9Q User Manual

F9Q ENGINE – Crankshaft Pulley
11A-3-2
REMOVAL SERVICE POINT
AA" CRANKSHAFT PULLEY REMOVAL
(1) Use special tool MB991800 and MB991802 to hold the
crankshaft pulley during removal.
INSTALLATION SERVICE POINT
"AA CRANKSHAFT PULLEY INSTALLATION
Caution
D Do not reuse the crankshaft pulley bolt.
(1) Use special tool MB991800 and MB991802 to hold the
crankshaft pulley during installation.
(2) Apply a coat of locking agent to the screw thread of the
bolt.
(3) Retighten the loosened bolt to 20 Nm in the tightening
sequence shown.
(4) Tighten the bolt further 115_ ± 15_ using an angle gauge.
PWEE0001
E
Jun. 2000Mitsubishi Motors Corporation
PWEE0001-A
E
Mar. 2001Mitsubishi Motors Corporation Revised
MB991800
MB991802
MB991800
MB991802

Mitsubishi F9Q Specifications

General

Brand	Mitsubishi
Model	F9Q
Category	Engine
Language	English