14
3-3-3 Using a graph
Click [Trend Graph] on the measurement condition list screen, and select the measured item to be displayed.
The measured value can be checked by graph. The graph can also be downloaded as a CSV file.
Item Description
Overview Switches to the screen where the measurement value can be checked as a list.
Update to most recent condition
Click [Update] to ensure the displayed items reflect the most recent operation
condition.
Selection of measured item
Click the [Selection of measured item], and select the measured item to be
displayed from the list.
Measurement date
Select the date when the value to be displayed is measured.
Note: Up to 62 days of the measurement data collected by the outdoor units can be
stored and displayed.
Electric Energy (kWh) Electric energy (kWh) is shown as a bar graph in 30-minute increments.
Electric Power (kW)
Electric power (kW) is shown as a line graph in 5-minute increments.
Note: The largest value of the values measured at 1-minute intervals in each 5 minutes
will be displayed..
Outdoor unit
Efficiency
Efficiency is shown as a line graph in 5-minute increments.
Note: The average value of the values measured at 1-minute intervals in each 5 minutes
will be displayed.
Note: The value for Efficiency will read "0" when the compressor on the outdoor unit
remains stopped for 5 minutes.
Overview display
Click to display the measurement
value as a list.
Update to most recent
condition
Click to update the screen so
that the most recent operation
condition is shown.
Selection of measured
item
Select the measured item to be
displayed.
Measurement value
The measured value is
displayed as a graph.
Download
Click to download the graph
in the CSV format.
Measurement date
Select the date when the value
to be displayed is measured.
To Next Page
Loading...
