Need help?Do you have a question about the Mitsubishi FX2N series and is the answer not in the manual?
General| Type | Programmable Logic Controller (PLC) |
|---|---|
| Manufacturer | Mitsubishi Electric |
| Series | FX2N |
| Power Supply | 100-240VAC or 24VDC |
| Program Capacity | 8, 000 steps |
| Expansion | Yes, via expansion modules |
| Operating Temperature | 0 to 55°C |
| I/O Points | 16 to 256 points |
| Communication | RS-422, RS-485 |
| Programming Language | Ladder Logic |
| Instruction Execution Speed | 0.08 µs/basic instruction |
| Mounting | DIN rail |
| Data Memory | 8, 000 words |
| Expansion Modules | Analog, digital, communication |
| Humidity | 5 to 95% RH (non-condensing) |
Details EMC compliance for FX2N series products with European directives.
Highlights critical safety precautions and best practices for wiring FX2N products.
Details technical specifications for 24V DC inputs, including action type and response time.
Provides technical specifications for AC 110V inputs, including voltage, impedance, and current.
Details specifications for relay outputs, including switched voltage, current, and load capacity.
Provides specifications for Triac (SSR) outputs, including switched voltage, current, and response time.
Details technical specifications for transistor outputs, including switched voltage, current, and response time.
Lists essential checks before system startup, covering power, wiring, and programming.
Helps identify common faults by analyzing LED status and system conditions.
Lists common issues like corroded contacts, overloaded devices, or signal timing problems.
Provides instructions for safely replacing the PLC's internal battery to maintain data.
Explains error flags (M8004-M8039) and their corresponding meanings and remedies.
Details error registers (D8000-D8009) for diagnosing system faults and conditions.
Lists specific error codes (D8061-D8062, D8065, D8066, D8068, D8069) and their causes.
To Next Page