To Next PageTo Next PageShould I set parameters for the N:N Network on my Mitsubishi FX2N-232-BD?
No, you should not set parameters for the N:N Network. Verify that the communication settings using parameters are suitable for use.
What to do if communication is not possible with Mitsubishi FX2N-232-BD Controller because of incorrect wiring?
If communication is failing, it might be due to incorrect wiring. Ensure that all communication equipment is wired correctly.
What to do if communication is not possible with Mitsubishi Controller when a communication port is set twice?
If communication fails, it could be because a communication port is set more than once. Verify that the communication format (D8120, D8400 and D8420) is set correctly.
What to do if communication is not possible with Mitsubishi FX2N-232-BD Controller when using RS and RS2 instructions?
If communication is failing, check that the RS and RS2 instructions are not being used for the same channel.
What to do if communication is not possible with Mitsubishi FX2N-232-BD when using the RS instruction?
If communication is not working, verify that the RS instruction is not used in the program.
What to do if communication is not possible with Mitsubishi FX2N-232-BD when using EXTR instruction?
If communication isn't working, ensure that the EXTR instruction is not used in the program.
What to do if communication is not possible with Mitsubishi FX2N-232-BD when using VRRD and VRSC instructions?
If communication isn't working, verify that the VRRD and VRSC instructions are not used in the program.
What to do if communication is not possible with Mitsubishi Controller when using IVCK, IVDR, IVRD, IVWR, and IVBWR instructions?
If communication is failing, verify that the IVCK, IVDR, IVRD, IVWR and IVBWR instructions are not being used for the same channel.
General| Model | FX2N-232-BD |
|---|---|
| Communication Protocol | RS-232C |
| Number of Channels | 1 |
| Data Length | 7 or 8 bits |
| Stop Bit | 1 or 2 bits |
| Applicable PLC | FX2N Series |
| Weight | 0.1 kg |
| Compatibility | FX2N Series PLC |
| Parity | Even, Odd, or None |
| Power Supply | 5V DC (from PLC) |
| Current Consumption | 60 mA |
| Type | RS-232C Communication Board |
User's manual covering data communication editions, serial communication, and applicable FX PLCs.
Precautions for designing safe systems, including emergency stops and protection circuits.
Precautions for wiring, including electrical shock prevention and noise disturbance.
Precautions for startup, cleaning, and maintenance of the PLC.
Explains communication setting methods and initialization procedures using parameters.
Details modem setup methods using GX Developer and FXGP/WIN on the PLC side.
Explains modem setup on the PC side, including AT command registration and telephone directory.
Covers troubleshooting for PLC version, communication status, installation, and modems.
