Mitsubishi FX2N-232-BD User Manual

I-24
FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Developer
5.1.2 Modem initialization setting using parameter method
This subsection explains how to select the AT command for initialization registered in the PLC and how to set
the AT command for an unregistered modem.
1 Opening the PLC parameter setting window
Double-click [Parameter] - [PLC parameter] from the project tree.
If the project tree is not displayed, select [View] - [Project data list] from the toolbar.
2 Selecting the modem initialization method
Click the [PLC system(1)] tab on the dialog box.
Select a modem to be connected in "MODEM initialized," and click the [End] button.
Example of the setting window in the FX
3U and FX3UC PLCs

Mitsubishi FX2N-232-BD Specifications

General

Brand	Mitsubishi
Model	FX2N-232-BD
Category	Controller
Language	English