F-8
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (RS/RS2 Instruction)
1 Outline
1.4 Programming Tool Applicability
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
1.4 Programming Tool Applicability
1.4.1 For applicable versions
The programming tool is applicable for each FX Series from the version shown.
1. Japanese versions
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
PLC Date when production was stopped Remarks
FX
0 Series
June 30, 2002
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
FX
2C Series
FX
2(FX) Series
FX
1 Series
FX
0S Series
January 31, 2006
Maintenance is offered within 7 years from the
end of production (until January 31, 2013).
FX
0N Series
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-J
(Ver. SW8 P or later)
Ver.8.13P
Select the model "FX3U/FX3UC"
FX3G PLC
GX Developer
SWD5C(F)-GPPW-J
(Ver. 8.72A or later) Select the model "FX3G"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-J
(Ver. SW2 A or later)
Select the model "FX2N/FX2NC"
FX-PCS/WIN
SW0PC-FXGP/WIN
(Ver. 2.00 or later)
FX-PCS-KIT/98
SW1PC-FXGP/98(-3,-5)
(Ver. 4.00 or later)
FX-PCS/98-3
SW1PC-FXGP/98-3
(Ver. 4.00 or later)
FX-PCS-KIT/V-3
SW1-PC-FXGP/V3
(Ver. 2.00 or later)
FX-A7PHP-KIT
SW1RX-GPPFX
(Ver. 3.00 or later)
FX-20P(-SET0)
FX-20P-MFXC
(Ver. 4.00 or later)
FX-10P(-SET0) (Ver. 3.00 or later)
GOT-F900 Series display
units
F940WGOT-TWD
F940GOT-*WD
F940GOT-*BD-H
F940GOT-*BD-RH
(Refer to right column)
F940WGOT-TWD (Ver.1.00 or later)
F940GOT-LWD, F940GOT-SWD (Ver.1.00 or later)
F940GOT-LBD-H, F940GOT-SBD-H (Ver.1.00 or later)
F940GOT-LBD-RH, F940GOT-SBD-RH (Ver.1.00 or later)
To Next Page
Loading...
Need help?
General
