Mitsubishi FX2N-232-BD User Manual

H-5
FX Series PLC User's Manual - Data Communication Edition
Programming Communication
1 Outline
1.3 Communication Type Applicability in PLC
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
1.3 Communication Type Applicability in PLC
1.3.1 Applicable versions
The communication types are applicable in the following versions.
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
*1. When using USB communication with a model that does not support USB communication equipment
(-BD), use the FX-USB-AW.
However, FX
2(FX), FX2C and FX1 PLCs do not support the FX-USB-AW.
Use the built-in USB port in FX
3G PLCs.
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
PLC
Standard
built-in
port in
accordance
with
RS-422
Optional
communication
equipment
operating in
accordance
with RS-422
(-BD)
Optional
communication
equipment
operating in
accordance
with RS-232C
Standard
built-in
port in
accordance
with USB
Optional
communication
equipment
operating in
accordance
with USB
(-BD)
*1
Remarks
(-BD) (ADP)
FX3UC(D, DSS)
Series
 —— ——
Programming
communication is
provided in all of
the standard built-
in port (RS-422,
USB) and optional
communication
equipment operat-
ing in accordance
with RS-422/RS-
232C/USB.
FX3UC-32MT-
LT(-2)
— 
FX
3U Series — 
FX
3G Series —
FX
2NC Series  —— ——
FX
2N Series ——
FX
1NC Series  —— ——
FX
1N Series ——
FX
1S Series ——
FX
0N Series  ———— —
Programming
communication is
provided in all of
the standard built-
in port (RS-422),
but is not provided
in any optional
communication
equipment operat-
ing in accordance
with RS-422/RS-
232C/USB.
FX0S Series  ———— —
FX
0 Series  ———— —
FX
2C Series  ———— —
FX
2(FX) Series  ———— —
FX
1 Series  ———— —
PLC Date when production was stopped Remarks
FX
0 Series
June 30, 2002
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
FX
2C Series
FX
2(FX) Series
FX
1 Series
FX
0S Series
January 31, 2006
Maintenance is offered within 7 years from the
end of production (until January 31, 2013).
FX
0N Series

Mitsubishi FX2N-232-BD Specifications

General

Brand	Mitsubishi
Model	FX2N-232-BD
Category	Controller
Language	English