G-5
FX Series PLC User's Manual - Data Communication Edition
Non-Protocol Communication (FX2N-232IF)
1 Outline
1.3 Communication Type Applicability in PLC
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter
Communication
F
Non-Protocol
Communication
(RS/RS2 Instruction)
G
Non-Protocol
Communication
(FX
2N
-232IF)
H
Programming
Communication
I
Remote
Maintenance
Apx.
Discontinued
models
1.3 Communication Type Applicability in PLC
1.3.1 Applicable versions
The communication types are applicable in the following versions.
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—:Not applicable
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
PLC Applicability (applicable version) Remarks
FX
3UC Series
FX3U Series
FX3G Series — 232IF is not connectable.
FX
2NC Series
FX2N Series
FX1NC Series — 232IF is not connectable.
FX
1N Series — 232IF is not connectable.
FX
1S Series — 232IF is not connectable.
FX
0N Series — 232IF is not connectable.
FX
0S Series — 232IF is not connectable.
FX
0 Series — 232IF is not connectable.
FX
2C Series — 232IF is not connectable.
FX
2(FX) Series — 232IF is not connectable.
FX
1 Series — 232IF is not connectable.
PLC Date when production was stopped Remarks
FX
0 Series
June 30, 2002
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
FX
2C Series
FX
2(FX) Series
FX
1 Series
FX
0S Series
January 31, 2006
Maintenance is offered within 7 years from the
end of production (until January 31, 2013).
FX
0N Series
To Next Page
Loading...
Need help?
General
