E-7
FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
1 Outline
1.4 Programming Tool Applicability
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter
Communication
F
Non-Protocol
Communication
(RS/RS2 Instruction)
G
Non-Protocol
Communication
(FX
2N
-232IF)
H
Programming
Communication
I
Remote
Maintenance
Apx.
Discontinued
models
1.4 Programming Tool Applicability
1.4.1 For applicable versions
The programming tool is applicable for each FX Series from the version shown:
1. Japanese versions
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
2. English versions
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
—: Not applicable
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-J
(Ver. SW8 P or later)
Ver.8.13P
Select the model "FX3U/FX3UC"
FX3G PLC
GX Developer
SWD5C(F)-GPPW-J
(Ver. 8.72A or later) Select the model "FX3G"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-J
(Ver. SW7 A or later)
Select the model "FX2N/FX2NC"
The versions shown on the left supporting EXTR instruction
are applicable
FX-PCS/WIN
SW0PC-FXGP/WIN
(Ver. 4.20 or later)
FX-20P(-SET0)
FX-20P-MFXD
(Ver. 5.10 or later)
FX-10P(-SET0) (Ver. 4.10 or later)
GOT-F900 Series display
units
F940WGOT-TWD
F940GOT-*WD
F940GOT-*BD-H
F940GOT-*BD-RH
(Refer to right column.)
F940WGOT-TWD (Ver. 1.30 or later)
F940GOT-LWD, F940GOT-SWD (Ver. 6.30 or later)
F940GOT-LBD-H, F940GOT-SBD-H (Ver. 6.30 or later)
F940GOT-LBD-RH, F940GOT-SBD-RH (Ver. 6.30 or later)
Model name
(Software name)
Applicability
(applicable version)
Remarks
FX3U and FX3UC PLCs
GX Developer
SWD5C(F)-GPPW-E
(Ver. SW8 P or later)
Ver.8.13P
Select the model "FX3U/FX3UC"
FX3G PLC
GX Developer
SWD5C(F)-GPPW-E
(Ver. 8.72A or later) Select the model "FX3G"
FX2N and FX2NC PLCs
GX Developer
SWD5C(F)-GPPW-E
(Ver. SW7 A or later)
Select the model "FX2N/FX2NC"
The versions shown on the left supporting EXTR instruction
are applicable
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
(Ver. 3.10 or later)
FX-20P-E(-SET0)
FX-20P-MFXD-E
(Ver. 4.10 or later)
FX-10P-E (Ver. 4.10 or later)
To Next Page
Loading...
Need help?
General
