D-9
FX Series PLC User's Manual - Data Communication Edition
Computer Link
1 Outline
1.4 Programming Tool Applicability
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter
Communication
F
Non-Protocol
Communication
(RS/RS2 Instruction)
G
Non-Protocol
Communication
(FX
2N
-232IF)
H
Programming
Communication
I
Remote
Maintenance
Apx.
Discontinued
models
1.4.2 For non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the function ranges provided for the alternative PLC
model such as instructions and program size.
*1. "FX
2N" is selected when the FX-10P is used.
Model to be programmed Model to be set Priority: High → Low
FX
3UC Series FX3UC → FX2N → FX2(FX)
FX
3U Series FX3U, FX3UC → FX2N → FX2(FX)
FX
3G Series FX3G →
FX
1N
*1
→
FX
2N
*1
FX2NC Series FX2NC, FX2N → FX2(FX)
FX
2N Series FX2N → FX2(FX)
FX
1NC Series FX1NC, FX1N → FX2N → FX2(FX)
FX
1N Series FX1N → FX2N → FX2(FX)
FX
1S Series FX1S → FX2(FX)
FX
0N Series FX0N → FX2(FX)
FX
0S Series FX0S → FX2(FX)
FX
0 Series FX0 → FX2(FX)
FX
2C Series FX2C, FX2 → FX2(FX)
FX
2(FX) Series FX2(FX)
FX
1 Series FX1
To Next Page
Loading...
Need help?
General
