Mitsubishi FX2N-232-BD User Manual

A-3
FX Series PLC User's Manual - Data Communication Edition
Common Items
1 Introduction
1.2 Outline and Features of Communication Types
A
Common Items
B
N:N Network
C
Parallel Link
D
Computer Link
E
Inverter Communication
F
Non-Protocol Communication (RS/RS2 Instruction)
G
Non-Protocol Communication (FX
2N
-232IF)
H
Programming Communication
I
Remote Maintenance
Apx.
Discontinued models
1.2 Outline and Features of Communication Types
This section outlines the communication types supported by FX PLCs.
1.2.1 CC-Link Network
→ For details, refer to the FX2N-16CCL-M USER’S MANUAL.
→ For details, refer to the FX
2N-32CCL USER’S MANUAL.
→ For details, refer to the FX
3U-64CCL USER’S MANUAL.
1. Outline
1) When the master station is an A/QnA PLC
2) When the master station is an Q PLC
ACPU,
QnACPU
Master
station
Terminal resistor
FXCPU
Remote
device
station
Remote I/O
for CC-Link
Inverter,
AC servo, etc.
Sensor, solenoid valve,
etc.
Terminal resistor
• Number of connectable units
• Total extension distance
: 64 maximum
: 1200 m (3937’ 0")
• Number of connectable units
• Total extension distance
Master
station
QCPU
Terminal resistor
FXCPU
FXCPU
Intelligent
device
station
Remote
device
station
Terminal resisto
r
Remote I/O
for CC-Link
Inverter,
AC servo, etc.
Sensor, solenoid valve,
etc.
: 64 maximum
: 1200 m (3937' 0")

Mitsubishi FX2N-232-BD Specifications

General

Brand	Mitsubishi
Model	FX2N-232-BD
Category	Controller
Language	English