Need help?Do you have a question about the Mitsubishi CR800 Series and is the answer not in the manual?
General| Maximum Axes | 8 |
|---|---|
| Protection Class | IP20 |
| Type | Robot controller |
| Compatible Robots | Mitsubishi Electric Robots |
| Controlled axes | Up to 8 axes |
| Programming language | MELFA BASIC V |
| Power Consumption | Varies by configuration |
| Operating Environment Temperature | 0°C to 40°C |
| Operating Environment Humidity | 20% to 80% (non-condensing) |
| Weight | Approx. 15 kg (varies by model) |
| Communication Interface | Ethernet, RS-232 |
Outlines critical safety measures and warnings for robot operation.
Lists changes and updates made across different document versions.
Provides an overview of the manual's purpose and scope.
Details error codes, their causes, and troubleshooting measures.
Provides supplementary information on maintenance procedures and error handling.
To Next Page