Move the lock knob to the lock position to
lock the door.
All doors should be kept locked while driv-
ing.
The driver’s door can be unlocked without
using the lock knob by pulling on the inside
door handle.
1. Move the inside lock knob to the locked
position.
2. Be sure the keys are not inside the vehi-
cle. Close the door.
N00549600240
If you open the driver’s door while the key is
in the “LOCK” or “ACC” position, a tone
will sound, reminding you to remove the key.
N00549700179
If the key is in the electric motor switch when
you push the lock knob forward with the
driver’s door or passenger’s door open, the
lock knob will automatically return to the
unlocked position.
N00509300607
To lock or unlock the door from
the inside
1- Lock
2- Unlock
To lock the door without using
the key
Key reminder buzzer
Lock out protection
Power door locks
When locking or unlocking with the key on
the driver’s door, only the driver’s door will
lock or unlock.
Repeated continuous operation between lock
and unlock could activate the power door
locking systems built-in protection circuit
and prevent the system’s from operating. If
this occurs, wait about 1 minute before oper-
ating the power door lock switch.
BK0233400US.book 9 ページ ２０１５年１１月１６日 月曜日 午前７時４０分
To Next Page
Loading...
