Mitsubishi i-MiEV 2017 - License Plate Lights

Replacement of light bulbs
Vehicle care and maintenance 9-27
9
3. Pull the bulb out of the socket.
4. To install the bulb, perform the removal
steps in reverse.
N00943900128
1. Remove the mounting screws (A) and
remove the light unit.
2. While holding down the tab (B), pull out
the connector.
3. Remove the screws (C) and then remove
the bulb holder.
4. Pull the bulb out of the socket.
5. To install the bulb, perform the removal
steps in reverse.
N00944001413
1. When removing the light unit (A), push it
toward the left side of the vehicle body.
High-mounted stop light License plate lights
BK0233400US.book 27 ページ ２０１５年１１月１６日 月曜日 午前７時４０分