FCC Notice: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, use and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio com-
munications.
However, there is no guarantee that interfer-
ence will not occur in a particular installation.
If this equipment does cause harmful interfer-
ence to radio or television reception, which
can be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
ICES Notice: This Class B digital apparatus
complies with Canadian ICES-003.
N00566401080
Enrollment commands
N00566701041
You can connect your USB memory device or
iPod* to play music files stored in the USB
memory device or iPod.
The following explains how to connect and
remove a USB memory device or iPod.
*: “iPod” is a registered trademark of Apple
Inc. in the United States and other countries.
N00566800087
1. Park your vehicle in a safe place and turn
the electric motor switch to the “LOCK”
position.
2. Open the USB input terminal cover (A) in
the floor console.
USB input terminal (if so
equipped)
How to connect a USB memory
device
BK0233400US.book 74 ページ ２０１５年１１月１６日 月曜日 午前７時４０分
To Next Page
Loading...
