• If the driver’s door is opened after the
key is removed from the electric motor
switch, a buzzer will sound to remind
you to turn off the lights.
• If the driver’s door is opened with the
key in the electric motor switch, a buzzer
will sound intermittently to remind you
to remove the key.
If the key is turned to “LOCK” or “ACC”
position with the driver’s door closed and
the combination headlights and dimmer
switch in the “ ” or “ ” position, the
lights will stay on for about 3 minutes and
then turn off automatically.
If the combination headlights and dimmer
switch is turned to the “ ” or “ ” posi-
tion again after the electric motor switch is
turned to “LOCK” or “ACC” position, the
auto-cutout function described above will not
work. The lights (the parking lights, tail lights
and license plate lights) will stay on and will
not turn off automatically.
N00549800213
If the driver’s door is opened with the key
removed from the electric motor switch while
the lights are on, the buzzer will sound to
remind you to turn off the lights.
The lights and buzzer will turn off automati-
cally.
Or you can turn the combination headlights
and dimmer switch to the “OFF” position to
stop the buzzer.
N00549900155
To change the headlights from high beam to
low beam and vice versa, pull the turn signal
lever to fully toward you (1). Switch the
headlights to low beam as a courtesy when-
ever there are oncoming vehicles, or when
there is traffic moving ahead of you. An illu-
minated blue light in the instrument cluster
indicates when the headlights are on high
beam.
N00550000198
You can flash the high beams by pulling the
lever gently toward you (2). The lights will
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
To Next Page
Loading...
