Mitsubishi i-MiEV 2017 - Page 184

USB input terminal (if so equipped)
Features and controls 5-75
5
3. Connect a commercially available USB
connector cable (C) to the USB memory
device (B).
4. Connect the USB connector cable (C) to
the USB input terminal (D).
5. To remove the USB connector cable, turn
the electric motor switch to the “LOCK”
position first and perform the installation
steps in reverse.
N00566901144
1. Park your vehicle in a safe place and turn
the electric motor switch to the “LOCK”
position.
2. Open the USB input terminal cover (A) in
the floor console.
3. Connect the connector cable to the iPod.
4. Connect the connector cable (B) to the
USB input terminal (C).
WARNING
 Place the USB memory device and the
USB connector cable so as not to interfere
with driving.
NOTE
 Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
How to connect an iPod
NOTE
 Use a genuine connector cable from Apple
Inc.
BK0233400US.book 75 ページ ２０１５年１１月１６日 月曜日 午前７時４０分