Mitsubishi K21 - Page 20

CRANKSHAFT
• Bend (mm)
Repair limit 0.05
• End play (mm)
Standard 0.05 - 0.18
Repair limit 0.20
• Journal dimension (mm)
Standard 62.942 - 62.955
• Pin standard dimension (mm)
Standard 44.961 - 44.974
• Journal oil clearance (mm)
Standard 0.020 - 0.073
Repair limit 0.10
• Pin oil clearance (mm)
Standard 0.032 - 0.066
FLYWHEEL
• Flywheel surface swing (mm)
Repair limit 0.10
• Ring gear surface swing (mm)
Repair limit 0.50
• Flatness (mm)
Repair limit 0.30
CAMSHAFT
• Bend (mm)
Repair limit 0.05
• Camshaft height (mm)
Standard 36.750 - 36.800 (For both intake and exhaust)
Size reduction limit 36.5
• Journal dimension (mm)
Standard Front 45.434 - 45.447
Center 43.897 - 43.910
Rear 41.218 - 41.231
• End play (mm)
Standard 0.025 - 0.255
Repair limit 0.40
• Journal oil clearance (mm)
Standard Front 0.025 - 0.051
Center 0.038 - 0.064
Rear 0.025 - 0.051
Repair limit Front 0.10
Center 0.15
Rear 0.10
GI-17
STANDARD AND REPAIR LIMIT