Mitsubishi L2A

LUBRICATION SYSTEM
9-3
1.1.1 Removing oil filter
(1) Place a drip pan under the oil filter.
(2) Remove the oil filter using a filter wrench.
Removing oil filter
1.1.2 Removing relief valve
Remove the plug from the gear case and take out the relief
spring and relief plunger.
Removing relief valve
1.1.3 Removing oil pressure switch
Using an oil pressure switch socket wrench, remove oil
presssure switch.
Removing oil pressure switch
Oil filter
Plug
Relief
spring
Gear case
Relief plunger
Oil pressure switch
socket wrench
P/N:MD998054