Mitsubishi L2A

11-1
INLET AND EXHAUST SYSTEMS
1. Removing inlet and
exhaust systems ...........................11-2
1.1 Removing inlet cover and
exhaust manifold.................................... 11-2
2. Disassembling, inspecting and
reassembling inlet and
exhaust systems ...........................11-3
2.1 Inspecting inlet cover and
exhaust manifold.................................... 11-3
2.2 Measuring distortion of inlet and
exhaust manifold.................................... 11-3
3. Installing inlet and
exhaust systems ...........................11-4
3.1 Installing inlet cover and
exhaust manifold.................................... 11-4