3-67 Emergency stop input and output etc.
3 Controller
Fig.3-21 ： Connection of the special-stop-input
SKIP
<DU1A-700 series>
1A
2A
3A
4A
1B
2B
3B
4B
専用停止入力コネクタ（SKIP）
電線差込口（AWG#24-18）
マイナスドライバ差込口
<The connector connection method>
The electric wire skins covering 7mm.
In the condition that the minus driver is inserted, insert the electric wire, and remove the
minus driver.
The electric wire is locked by the connector.
Special stop connector
Minus driver plug area
Electric wire plug area(AWG#24-18)
SKIP
<DU2A-700 series>
* The figure is standard specification.
(The CE marking specification is the same.)
To Next Page
Loading...
