4 - 26
CPU MODULE4.
POINT
Note that the sequence program can use only up to 22k steps when the maximum
16k bytes are used for the MELSECNET/10 network parameters.
The memory area for the sequence program for A2USHCPU-S1, A2ASCPU-S30
is the same as that for MELSECNET/10. Therefore, the remainder which is
subtracted the memory area used by the MELSECNET(II) and MELSECNET/10
parameters from the max. 30k steps can be used for the sequence program.
To Next Page
Loading...
