N00731301292
Set the mode selection dial to the positions
shown in the illustration and set the air selec-
tion lever to the outside air position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Set the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon the
position of the temperature control dial) flows
to the upper part of the passenger compart-
ment.
N00731401596
Set the mode selection dial (between “ ”
and “ ”) to remove frost or mist from the
windshield and door window.
For ordinary defrosting
Use this setting to keep the windshield and
door windows clear of mist, and to keep the
leg area heated (when driving in rain or
snow).
1. Set the mode selection dial to the “ ”
position.
If the outside air is dusty or contaminated in
some way, set the air selection lever to the
recirculation position. Let in some outside
air from time to time for good ventilation.
To cool the leg areas, set the mode selection
dial to the “ ” position.
Combination of unheated air and
heated air
Defrosting or defogging (wind-
shield, door windows)
For safety, make sure you have a clear view
through all the windows.
BK0235100US.book 10 ページ 2015年11月20日 金曜日 午後3時12分