Mitsubishi Mirage 2017 User Manual

To play tracks from USB device (if so equipped)
Comfort controls 7-35
7
N00764001097
1. Press the PWR switch to turn on the audio
system. The system turns on in the last
mode used.
2. Connect your USB memory device to the
USB input terminal.
Refer to “How to connect a USB memory
device” on page 5-102.
3. Press the MEDIA button several times to
switch to the USB mode. The input mode
changes as follows every time the
MEDIA button is pressed: CD mode 
USB mode Bluetooth
®
mode (if so
equipped)  AUX mode  CD mode.
The USB indicator are illuminated and
then the USB mode will be activated.
4. Once the device is selected, playback
starts and indicator appears on the dis-
play.
5. To stop the playback, press the RADIO
button or MEDIA button to switch to a
different mode.
N00764100105
This audio can play MP3, WMA and AAC
files recorded in a USB memory device. This
audio supports up to 65,535 files in 700 fold-
ers on 8 levels.
The folder and file hierarchy in the USB
memory device is shown below.
N00764200034
To fast-forward/reverse the current track,
press the button or button.
15- RPT (Repeat) button
16- RDM (Random) button
To play from a USB memory
device
NOTE
 Depending on the condition of your USB
device, it may take a longer time before the
playback starts.
NOTE
 To adjust the volume and tone, refer to “To
adjust the volume” on page 7-20 and “To
adjust the tone” on page 7-20.
Supported compressed music files
Folder selection order/file playback
order (example)
Folder selection
In the order
File selection
In the order
NOTE
 If a file protected by copyrights is played, the
file will be skipped.
To fast-forward/reverse the track
Root folder (Root directory)
Level 1 Level 2 Level 3 Level 4
BK0235100US.book 35 ページ ２０１５年１１月２０日 金曜日 午後３時１２分

Mitsubishi Mirage 2017 Specifications

General

Brand	Mitsubishi
Model	Mirage 2017
Category	Automobile
Language	English