Mitsubishi MMES User Manual

30
Entering an address (United States)
To enter an address as the destination, do as
follows:
1. If you are on the Map screen, tap
to return to the
Navigation menu.
2. In the Navigation menu, tap the following
buttons:
, .
3. By default, MMES proposes the country
and state where you are. If needed, tap
, enter the first few
letters of the destination country or state
on the keyboard, and select one from the
list. If you select a country without a state,
you can search for a city/town in all its
states.
4. Select a new city/town:
a. Tap . The city/town
of your current location is offered by
default. For a local search, tap
to accept it, otherwise continue with
entering the destination city/town name.
b. Start entering the name of the city/
town on the keyboard.
c. Find the city/town you need:
• The most likely city/town name is
always shown in the input field. To
accept it, tap .
• If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the city/
town from the list.
5. Enter the street name:
a. Tap .
b. Start entering the street name on the
keyboard.
c. Find the street you need:
• The most likely street name is
always shown in the input field. To
accept it, tap
.
• If the desired name does not
show up, the names that match
the string appear in a list after
entering a couple of characters
(to open the list of results before
it appears automatically, tap
). Select the
street from the list.
6. Enter the house number:
a. Tap .
b. Enter the house number on the
keyboard. (To enter letters, tap ).
205-0010-00_QY-7375M-A_EN.indb 30205-0010-00_QY-7375M-A_EN.indb 30 3/12/2013 9:57:16 AM3/12/2013 9:57:16 AM

Mitsubishi MMES Specifications

General

Brand	Mitsubishi
Model	MMES
Category	Car Receiver
Language	English