54
• Tap to reorder the
list. You can do it manually or you can
let the application optimize the route
for you.
q Pausing the active route
You do not need to pause the active route:
when you start driving again, MMES restarts
the voice instructions from your position.
q Canceling the active route
To cancel the navigated route, do one of the
following:
• If you are on the Map screen, tap and
then tap . (If you have a route with
waypoints, you need to tap until all
waypoints are deleted.)
• In the Navigation menu, tap
and then tap
. The active route is
deleted with all its waypoints.
q Checking route alternatives
when planning the route
You can select from different route
alternatives or change the route planning
method after you have selected a new
destination. Do as follows:
1. Select a destination as explained earlier,
and get to the route confirmation screen.
2. Tap .
3. Tap .
4. You see the basic details of three route
alternatives with the selected route
planning method. Tap any of them to see it
on the map.
5. Or if you cannot find a good alternative,
tap and scroll down for
routes with different routing methods.
6. Select one of the route alternatives and
tap to return to the
previous screen. MMES recalculates the
route. The orange line now shows the new
recommended route.
205-0010-00_QY-7375M-A_EN.indb 54205-0010-00_QY-7375M-A_EN.indb 54 3/12/2013 9:57:22 AM3/12/2013 9:57:22 AM
To Next Page
Loading...
Need help?
General
