APPENDIX
App. - 15
App. 4.7 Technical data
App. 4.7.1 MR-JE servo amplifier
Item
MR-JE-10_/MR-JE-20_/MR-JE-40_/
MR-JE-70_/MR-JE-100_/MR-JE-200_
MR-JE-300_
Power
supply
Line voltage
3-phase or
1-phase 200 V AC to 240 V AC, 50 Hz /60 Hz
3-phase 200 V AC to 240 V AC, 50 Hz/60 Hz
Interface (SELV)
24 V DC, (required current capacity: MR-JE-_A(S),
300 mA; MR-JE-_B, 300 mA; MR-JE-_C, 300 mA) (Note)
Control method Sine-wave PWM control, current control method
Pollution degree 2 (IEC/EN 60664-1)
Overvoltage category 1-phase 200 V AC: II (IEC/EN 60664-1), 3-phase 200 V AC: III (IEC/EN 60664-1)
Protective class I (IEC/EN 61800-5-1)
Short-circuit current rating (SCCR) 100 kA
Note. This will be 100 mA for the MR-JE-_B servo amplifiers manufactured in April 2016 or before (May 2016 or before for amplifiers
manufactured in China).
App. 4.7.2 Dimensions/mounting hole process drawing
WD
H Front Side
Servo amplifier
Variable dimensions [mm]
Mass [kg]
W H D
MR-JE-10_/MR-JE-20_/MR-JE-40_ 50 168 135 0.8
MR-JE-70_/MR-JE-100_ 70 168 185 1.5
MR-JE-200_/MR-JE-300_ 90 168 195 2.1
da
c
b
c
a1
e
Servo amplifier
Variable dimensions [mm]
Screw size
e
a a1 b c d
MR-JE-10_/MR-JE-20_/MR-JE-40_ 6 6 156 ± 0.5 6 M5
MR-JE-70_/MR-JE-100_ 22 22 156 ± 0.5 6 42 ± 0.3 M5
MR-JE-200_/MR-JE-300_ 6 45 156 ± 0.5 6 78 ± 0.3 M5
App. 5 SSCNET III cable (SC-J3BUS_M-C) manufactured by Mitsubishi Electric System &
Service
POINT
For the details of the SSCNET III cables, contact your local sales office.
Do not look directly at the light generated from the CN1A connector and CN1B
connector of servo amplifier or the end of SSCNET III cable. The light can be a
discomfort when it enters the eye.
The cable is available per 1 m up to 100 m. The number of the length (1 to 100) will be in the underscore in
the cable model.
Cable model
Cable length
Bending life
Application and
remark
1 m to 100 m
SC-J3BUS_M-C 1 to 100
Ultra-long
bending life
Using long distance
cable
To Next Page
Loading...
