EasyManuals Logo

Mitsubishi MUY-A15NA User Manual

Mitsubishi MUY-A15NA
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2
1
TECHNICAL CHANGES
INFORMATION FOR THE AIR CONDITIONER WITH R410A REFRIGERANT
This room air conditioner adopts HFC refrigerant (R410A) which never destroys the ozone layer.
Pay particular attention to the following points, though the basic installation procedure is same as that for R22 air
conditioners.
1 As R410A has working pressure approximate 1.6 times as high as that of R22, some special tools and piping parts/
materials are required. Refer to the table below.
2 Take sufficient care not to allow water and other contaminations to enter the R410A refrigerant during storage and
installation, since it is more susceptible to contaminations than R22.
3 For refrigerant piping, use clean, pressure-proof parts/materials specifically designed for R410A. (Refer to 2. Refrigerant
piping.)
4 Composition change may occur in R410A since it is a mixed refrigerant. When charging, charge liquid refrigerant to prevent
composition change.
MUZ09UN MUZ-A09NA
MUZ12UN MUZ-A12NA
MUH15TN MUZ-A15NA
MUH17TN MUZ-A17NA
MUH24WN MUZ-A24NA
MU15TN MUY-A15NA
MU17TN MUY-A17NA
MU24WN MUY-A24NA
1. Outdoor unit model has been changed.
2. Control method between indoor and outdoor unit has been changed.
3. Refrigerant has been changed. (R22 R410A)
4. Fan motor has been changed. (AC DC)
5. Compressor has been changed. (AC DC)
Refrigeration
oil
Refrigerant
New refrigerant
R410A
HFC-32: HFC-125 (50%:50%)
Pseudo-azeotropic refrigerant
Not included
A1/A1
72.6
-60.5
225.82
3.995
Non combustible
0
1730
From liquid phase in cylinder
Possible
Incompatible oil
Non
Non
Previous refrigerant
R22
R22 (100%)
Single refrigerant
Included
A1
86.5
-41.4
136.34
2.772
Non combustible
0.055
1700
Gas phase
Possible
Compatible oil
Light yellow
Non
Refrigerant
Composition (Ratio)
Refrigerant handling
Chlorine
Safety group (ASHRAE)
Molecular weight
Boiling point (°F)
Steam pressure [77°F](PSIG)
Saturated steam density [77°F](lb/ft
3
)
Combustibility
ODP w1
GWP w2
Refrigerant charge method
Additional charge on leakage
Kind
Color
Smell
w1:Ozone Destruction Parameter : based on CFC-11
w2 :Global Warmth Parameter : based on CO
2
OB451--1.qxp 06.3.29 9:51 AM Page 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi MUY-A15NA and is the answer not in the manual?

Mitsubishi MUY-A15NA Specifications

General IconGeneral
BrandMitsubishi
ModelMUY-A15NA
CategoryAir Conditioner
LanguageEnglish

Related product manuals