Mitsubishi MUZ-A15NA - Page 64

64
5. Removing outdoor fan motor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Remove the propeller.
(5) Remove the screws fixing the fan motor.
(6) Remove the fan motor.
Photo 7
Propeller
Screws of the outdoor fan motor
OPERATING PROCEDURE
PHOTOS
4. Removing the defrost thermistor (MUZ), discharge
temperature thermistor, outdoor heat exchanger
temperature thermistor and ambient temperature
thermistor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Pull out the defrost thermistor from its holder. (Photo 6)
(MUZ)
(5) Pull out the discharge temperature thermistor from its
holder. (Photo 5)
(6) Pull out the outdoor heat exchanger temperature thermistor
from its holder. (Photo 6)
(7) Pull out the ambient temperature thermistor from its holder.
(Photo 6)
Photo 5
Photo 6
Defrost
thermistor
(for MUZ)
Discharge temperature thermistor
Outdoor heat
exchanger
temperature
thermistor
Ambient
temperature
thermistor
OB451--3.qxp 06.3.29 9:47 AM Page 64