Mitsubishi Outlander 2009 User Manual

3-120
Features and controls
3
N
OTE
● The control mode can be changed while the vehicle is
moving.
S-AWC control mode display
The currently selected control mode is displayed on the multi-
information display.
In addition, when the control mode is changed, the selected
mode appears on the interrupt display screen of the information
screen in the multi-information display.
The control mode display will appear on the information
screen for a few seconds, and then the original screen will
return.
CAUTION
!
● Do not operate the dial while the tires are spinning.
The vehicle might suddenly move in an unantici-
pated direction.
● Driving on dry, paved roads in “LOCK” mode will
increase fuel consumption and noise, and cause pre-
mature tire wear.
● When the tires spin, especially if “LOCK” mode has
been selected and the ASC has been turned off, you
may experience strong steering feedback. Grip the
steering wheel firmly.
Example: “TARMAC” mode is selected.
BK0150600US.book 120 ページ ２０１２年３月３０日 金曜日 午前１０時４３分

Mitsubishi Outlander 2009 Specifications

General

Brand	Mitsubishi
Model	Outlander 2009
Category	Automobile
Language	English