For emergencies
6-23
6
Wheel cover (if so equipped)
N00849400182
To remove
Wrap the tip of the bar with a cloth, insert it deeply into the
notch provided in the wheel cover, and pry the cover away
from the wheel.
Using the same procedure at the other wheel cover notches,
work the wheel cover away from the wheel to remove it com-
pletely.
OTE
● The wheel cover is made of plastic. Be careful when pry-
ing it off.
To i nsta ll
CAUTION
!
● Trying to remove the wheel cover with only your
bare hands can seriously injure your fingers.
CAUTION
!
● Before installing the wheel cover to the wheel, make
sure that the tabs (A) on the back of the wheel cover
correctly engage the ring (B) to prevent the wheel
cover from coming off. Do not install a wheel cover
that has broken tabs.
BK0150600US.book 23 ページ 2012年3月30日 金曜日 午前10時43分